Introduction of Ceramic Industry Filter Press:
The ceramic industry filter press is the main equipment for dewatering the ceramic sludge in electrical porcelain and ceramic industry. This ceramic filter is applied with traditional filtration system using traditional slurry dewatering method. With the slurry pressure of 1.5-2Mpa/cm2, the mud cake after pressing will contains water rate as 20-24%, and as the following procedure of pressing the mud. The ceramic filter machine can also be used for dewatering chemical equipment, light industry, metallurgy, environmental protection and other industries. There is ceramic filter press factory in China.
The ceramic filter system is mainly composed of a pressing tail, a filter plate, a guide rod, a middle support, a pressing head, a pressure holding hand wheel, an oil cylinder base, an oil cylinder, an oil pipe hydraulic station and a filter cloth (canvas or nylon cloth). The ceramic filter press machine can greatly improve your work.
The filter plate of this ceramic filter are pressed by the piston head by mechanical pressure to promote the closure of the hand-wheel (see cylinder assembly diagram), with manual unloading of mud cake. This ceramic filter is installed in the reinforced concrete foundation with drainage groove, which is convenient installation and operation.
Filter press specification sheet
1. Pressure: 100T
2. Piston Stroke: 600mm
3. Hydraulic System working pressure: 25MPa
4. Slurry Feed-in Pressure:2-2.5MPa
5. Slurry water content after dewatering: 20-24%
6. Working Temperature: 90(℃)
7. Size: 6660*1110*1200mm
8. Weight: 8900KGS
Advantage of Ceramic Industry Filter Press:
1. High Automation
The ceramic filter press automatically opens the filter plate to remove the filter cake to reduce the labor, reduce the working intensity and improve the working efficiency
2. Hydraulic system
It is using hydraulic device system as pressing and loosening filter plate
3. Easy Operation.
The ceramic filter system is simple in operation, safe and labor-saving, and realizes the required action through the operation button on the control panel of the electric appliance
4. Special design on filtering plate
The filter plate is designed with variable cross-section, the structure of the filter is quincunx shape, which can effectively reduce the filtration resistance, the filtration speed is fast, and the filtrate is smooth
Application of Ceramic Industry Filter Press:
Ceramic industry filter press is produced by Golden Triumph Group Company, which is specially applied in ceramic industry for filtering and dewatering the slurry. This ceramic filter is under pressure and high resistance. After filtration, the water content of the medium is low, and the service life of the filter plate is long, which gains a good reputation for our filter press products.
Buy ceramic filter press is confused in some way.
To be the outstanding ceramic filter manufacturer, Golden Triumph will always provide good service for their customers with our variation quality products.